Machine Learning is used to create predictive models by learning features from datasets. In the studies performed by Jason G. Fleischer et al. 2018 and Jana Naue et al. 2017, biomarkers are examined to predict the chronological age of humans by analysing the RNA-seq gene expression levels and DNA methylation pattern respectively. Different machine learning algorithms are used in these studies to select specific biomarkers to make age prediction. The RNA-seq gene expression (FPKM) dataset is generated using fibroblast cell lines of humans. The skin fibroblasts cells keep damage that happens with age. Epigenomic and phenotypic changes which are age-dependent are also contained in these cells. Within each individual, DNA methylation changes with age. This knowledge is used to select useful biomarkers from DNA methylation dataset. The CpGs sites with the highest correlation to age are selected as the biomarkers/features. In both these studies, specific biomarkers are analysed by machine learning algorithms to create an age prediction model.

The datasets from these studies contain features (present as columns). The last column in both the datasets refers to age which is used as labels/targets. Since the targets are real numbers, the machine learning task becomes regression. Using these features and targets, a model is learned using machine learning (regression) which learns a mapping between these features and targets. Using machine learning tools in Galaxy, we can achieve comparable prediction scores to those achieved by published analyses. In this tutorial, we will apply a couple of (scikit-learn) machine learning tools to RNA-seq and DNA methylation datasets to predict the chronological age of humans. This tutorial is divided into two parts - one with an RNA-seq dataset and another with a DNA methylation dataset.

Comment

In cross-validation, a dataset is divided into k equal parts (k should be at least 2). One part is used as the validation set to evaluate the performance of any machine learning algorithm and the remaining parts are used for learning/training.

R2 (coefficient of determination)

In both the parts, learning on datasets is done using cross-validation and the R2 scoring metric is used to evaluate the performance of the trained model. The closer it is to 1.0, the better it is. If it is negative, then the trained model is not good. To infer how its values exhibit model performance, we can compare the figures 1 and 2. In both the plots, the true and predicted targets are plotted in a scatter plot. For a good model, most of the points should lie along the x = y line as the true and predicted targets are close to each other. In figure 1, we can see that the points are scattered and do not show any pattern. Therefore, the R2 score is -0.06. But, figure 2 shows a better pattern as most of the points lie along the line and the R2 score is almost 1.0. For RNA-seq dataset, we will compute the cross-validated R2 score using the training set and for DNA methylation dataset, we will compute the R2 score for the test set.

Open image in new tab

Open image in new tab

Agenda

In this tutorial, we will cover:

1. Analyze RNA-seq dataset
   1. Get dataset
   2. Create data processing pipeline
   3. Optimise hyperparameters
   4. Create parallel coordinates plot
   5. Compare results with original paper
   6. Summary
2. Analyze DNA methylation dataset
   1. Get train and test datasets
   2. Create data processing pipeline
   3. Optimise hyperparameters
   4. Predict age
   5. Create plots
   6. Compare results with original paper
   7. Summary
3. Conclusion

Analyze RNA-seq dataset

The RNA-seq dataset is collected from fibroblast cell lines belonging to 133 healthy patients with age ranging from 1 to 94 years. The skin fibroblasts cells dataset is conducive for age prediction related studies for multiple reasons - these skin fibroblasts hold age-related damage, contain phenotypic, epigenomic and transcriptomic changes which are age-dependent and it is easy to collect this dataset using non-invasive techniques. Using this dataset, we perform an exhaustive search (also known as grid search) for finding the best features and then apply ElasticNet regressor with 5-fold cross-validation. The R2 score achieved is comparable to the predictions found in the study performed by Jason G. Fleischer et al. 2018.

Details: 5-fold cross-validation

It is a model validation technique which estimates the performance of a predictive model on an unseen data. A dataset is divided into 5 folds and these folds are categorised into training and validation sets. The idea of cross-validation is shown in figure 3. The complete dataset is divided into 5 equal parts. 80% of the dataset is used for training and the remaining 20% is used for validating the performance of training. This is done for 5 folds/iterations, each time the validation set (20% of the dataset) is different. In all five folds, the complete dataset is used for training and validation. The final validation performance is averaged over 5 folds.

Open image in new tab

Get dataset

We proceed to the analysis by uploading the RNA-seq dataset. The dataset has 133 rows corresponding to human patients and over 27,000 columns specifying genes. The last column age contains the chronological age. For the validation set, this age column is predicted and the R2 metric is computed.

Hands-on: Data upload

1. Create a new history for this tutorial

   Tip: Creating a new history

   To create a new history simply click the new-history icon at the top of the history panel:

   

2. Import the files from Zenodo

   https://zenodo.org/record/2545213/files/training_data_normal.tsv
   

   Tip: Importing via links

   • Copy the link location

   • Click galaxy-upload Upload Data at the top of the tool panel

   • Select galaxy-wf-edit Paste/Fetch Data

   • Paste the link(s) into the text field

   • Press Start

   • Close the window

3. Rename the dataset to training_data_normal.

   Tip: Renaming a dataset

   • Click on the galaxy-pencil pencil icon for the dataset to edit its attributes
   • In the central panel, change the Name field
   • Click the Save button

4. Check that the datatype is tabular.

   Tip: Changing the datatype

   • Click on the galaxy-pencil pencil icon for the dataset to edit its attributes
   • In the central panel, click galaxy-chart-select-data Datatypes tab on the top
   • In the galaxy-chart-select-data Assign Datatype, select datatypes from “New type” dropdown
     • Tip: you can start typing the datatype into the field to filter the dropdown menu
   • Click the Save button

Comment

In the training_data_normal dataset, you might have noticed that it showed 134 rows instead of 133 rows. The first row contains the header information i.e. the description of each column.

Create data processing pipeline

We can see that this RNA-seq dataset is high-dimensional. There are over 27,000 columns/features. Generally, not all the features in the dataset are useful for prediction. We need only those features which increase the predictive ability of the model. To filter these features, we perform feature selection and retain only those which are useful. To do that, we use SelectKBest module. This approach involves extracting those features which are most correlated to the target (age in our dataset). F-regression is used for the extraction of features. Moreover, we are not sure of how many of these features we will need. To find the right number of features, we do a hyperparameter search (to find the best combination of values of different parameters). It works by setting many different numbers of features to determine to number which gives the highest accuracy. To wrap this feature selector with a regressor, we will use the Pipeline builder tool. This tool creates a sequential flow of algorithms to execute on datasets. Since the hyperparameters will be tuned, we choose to output the parameters for searchCV. The tool does not take any dataset as input. Rather, the outputs will be used as inputs to the Hyperparameter search tool (explained in the following step). We will use ElasticNet as a regressor which creates an age prediction model. It is a linear regressor with l1 (also called lasso) and l2 (also called ridge) as regularisers. Regularisation is a technique used in machine learning to prevent overfitting. Overfitting happens when a machine learning algorithm starts memorising the dataset it is trained upon, rather than learning general features. The consequence of overfitting is that the accuracy on the training set is good, but results on the unseen set (test set) are poor, which happens because the algorithm has not learned general features from the dataset. To prevent overfitting, regularisers like l1 and l2 are used. L1 is a linear term added to the error function of a machine learning algorithm and l2 adds a squared term to the error function. More details about l1 and l2 can found here.

Hands-on: Create pipeline

1. Pipeline builder tool with the following parameters:
   • In “1: Pre-processing step”:
     • “Choose the type of transformation”: Feature Selection
       • “Select a feature selection algorithm”: SelectKBest - Select features according to the k highest scores
         • “Select a score function”: f_regression - Univariate linear regression tests
   • In “Final Estimator”:
     • “Choose the module that contains target estimator”: sklearn.linear_model
       • “Choose estimator class”: ElasticNet
       • “Type in parameter settings if different from default”: random_state=42
   • In “Output parameters for searchCV?”: Yes

Optimise hyperparameters

In any machine learning algorithm, there are many parameters (hyperparameters). We are not sure which values of these parameters will give an optimal prediction. The default values given for these parameters may not be optimal for different datasets. To find the best combination of the values of different parameters for a dataset, hyperparameter optimisation is performed. There are different techniques to optimise the hyperparameters of any algorithm given a dataset:

• Grid search
• Random search

For our analyses, we will use the grid search approach. It is an exhaustive search which tries out all the combinations of different hyperparameters and ranks these combinations based on a scoring metric. In the random search, the values of a parameter are selected randomly from a given range and the best one is found. Grid search works well for parameters taking categorical as well as numerical values but for the random search, it becomes difficult for parameters which take categorical values.

In the Pipeline builder tool, we added two steps - preprocessing (feature selection) and an estimator (regressor). There are different hyperparameters for these two steps and their best combination needs to be found. We will perform grid search to estimate the best values for these parameters: k (number of features), normalize (subtract the mean and divide by the l2-norm of the dataset) and alpha (a constant which is multiplied by the regularisation term). For each parameter, we need to specify a set of values to choose from:

• k: [5880, 5890, 5895, 5900]

  These values of k are chosen to get the best accuracy. We can choose any number (integers) between 1 and 27,000 (maximum number of features in the dataset). We will use only these values (shown above) for k as the accuracy remains the best around these numbers. However, it may vary for a different RNA-seq dataset. That’s the reason why we perform hyperparameter search to find the best values of parameters for any dataset.

• normalize: [True, False]

  The default value of normalize is False. We will check both, True and False.

• alpha: [0.00001, 0.0001, 0.001]

  The parameter alpha takes a positive real number and its default value is 1.0.

For these three parameters, we have 24 different combinations (4 x 2 x 3) of values and we will verify the performance of each combination. The parameter k is used for feature selection and parameters normalize and alpha are used for the regressor. There are many more hyperparameters of the ElasticNet regressor which are explained in the official documentation of scikit-learn. However, the combination of the above three parameters already gives a comparable accuracy published in the study Jason G. Fleischer et al. 2018. Therefore, we will stick to these parameters.

Comment

It is advisable to tune all the parameters of a machine learning algorithm for a dataset if no prior information is available about the subset of parameters which works best for the dataset.

Comment

These parameters have the same description and values in the second part of the tutorial where we will again use the Hyperparameter search tool.

Search for the best values of hyperparameters

We will use the Hyperparameter search tool to find the best values for each hyperparameter. These values will lead us to create the best model based on the search space chosen for each hyperparameter.

Hands-on: Hyperparameter search

1. Hyperparameter search tool with the following parameters:
   • “Select a model selection search scheme”: GridSearchCV - Exhaustive search over specified parameter values for an estimator
     • param-files “Choose the dataset containing pipeline/estimator object”: zipped file (one of the outputs of Pipeline builder tool)
     • In “Search parameters Builder”:
       • param-files “Choose the dataset containing parameter names”: tabular file (the other output of Pipeline builder tool)
       • In “Parameter settings for search”:
         • param-repeat “1: Parameter settings for search”
           • “Choose a parameter name (with current value)”: selectkbest__k: 10
           • “Search list”: [5880, 5890, 5895, 5900]
         • param-repeat “2: Parameter settings for search”
           • “Choose a parameter name (with current value)”: elasticnet__normalize: False
           • “Search list”: [True, False]
         • param-repeat “3: Parameter settings for search”
           • “Choose a parameter name (with current value)”: elasticnet__alpha: 1.0
           • “Search list”: [0.00001, 0.0001, 0.001]
     • In “Advanced Options for SearchCV”:

       • “Select the primary metric (scoring)”: Regression -- 'r2'

         A scoring metric can be set. In this tutorial, we use Regression -- 'r2'

       • “Select the cv splitter”: KFold

         There are different ways to split the dataset into training and validation sets. In our tutorial, we will use KFold which splits the dataset into K consecutive parts. It is used for cross-validation. It is set to 5 using another parameter n_splits.

         • “n_splits”: 5
         • “Whether to shuffle data before splitting”: Yes

         • “Random seed number”: 3111696

           It is set to an integer and used to retain the randomness/accuracy when “Whether to shuffle data before splitting” is Yes across successive experiments.

       • “Raise fit error”: No

         While setting different values for a parameter during hyperparameter search, it can happen that wrong values are set which may generate exceptions. To avoid stopping the execution of a regressor, it is set to No which means even if a wrong parameter value is encountered, the regressor does not stop running and skips that value.

   • “Select input type”: tabular data
     • param-files “Training samples dataset”: training_data_normal tabular file
     • “Does the dataset contain header”: Yes
     • “Choose how to select data by column”: All columns EXCLUDING some by column header name(s)
       • “Type header name(s)”: age
     • param-files “Dataset containing class labels or target values”: training_data_normal tabular file
     • “Does the dataset contain header”: Yes
     • “Choose how to select data by column”: Select columns by column header name(s)
       • “Type header name(s)”: age
   • “Whether to hold a portion of samples for test exclusively?”: Nope

The tool returns two outputs, one of which is a table with numerical results. Please inspect it carefully: the rank_test_score column shows the ranking of different combinations based on the values in the mean_test_score column.

Question

1. What is the best mean_test_score value estimated by the Hyperparameter search tool?
2. Which combination of parameters gives the best result?
3. How many possible combinations of parameters the Hyperparameter search tool estimated?

Solution

1. 0.73 (it is close to the best R2 score (0.81) achieved by a customised ensemble algorithm explained by Jason G. Fleischer et al. 2018)
2. alpha: 0.001, normalize: True, k: 5880
3. 24 (it is equal to the number of rows in the tabular output of Hyperparameter search tool)

Create parallel coordinates plot

We will visualize the tabular output of Hyperparameter search tool from the previous step using the Parallel coordinates plot of tabular data tool. There are multiple columns in the tabular output, but we will focus on only a few of them.

Hands-on: Create parallel coordinates plot

1. Parallel coordinates plot tool with the following parameters:
   • param-files “Select data file”: tabular file (output of Hyperparameter search tool)
   • “Select the columns for dimensions”: c4, c5, c6
   • “Select a column containing the values for coloring”: c3

The output plot has the following legend: the colour-coding is based on the mean_test_score (c3) column. You can follow the line leading to the score along every column with the parameters’ settings. The columns c4, c5 and c6 are the parameters we chose and c3 is the accuracy column present in the tabular output of Hyperparameter search tool.

Open image in new tab

Question

What are the worst performing combinations of hyperparameters (name four)?

Solution

Worst four:

• alpha: 0.00001, normalize: False, k: 5880
• alpha: 0.00001, normalize: False, k: 5890
• alpha: 0.00001, normalize: False, k: 5895
• alpha: 0.00001, normalize: False, k: 5900

Compare results with original paper

Open image in new tab

Summary

Figure 4 shows that we achieved an R2 score of 0.73 (last column) with 5-fold cross-validation on the training set. In the study Jason G. Fleischer et al. 2018 as well, a similar R2 score is mentioned for linear regressors (Linear regression and ElasticNet). Moreover, the study also included a customised ensemble regressor which achieved better performance (R2 = 0.81). However, our analysis showcases the use of machine learning tools in Galaxy to reproduce the results published in the paper.

Analyze DNA methylation dataset

In the second part of the analysis, we will use the DNA methylation dataset to predict chronological age. One important reason to choose this dataset for an age prediction task is that DNA methylation changes with age and this change occurs at specific CpG sites in humans. Whole blood samples are collected from humans with their ages falling in the range 18-69 and the best age-correlated CpG sites in the genome are chosen as features. The dataset is divided into two parts - training and test sets. The training set is used to train a regressor and the test set is used to evaluate the performance of the trained model using the R2 scoring metric. 5-fold cross-validation is used for training.

Get train and test datasets

We proceed with the analysis by uploading new datasets. You might want to create a new history first. The training set contains 208 rows corresponding to humans and 13 features (age-correlated CpG sites in DNA methylation dataset). The last column is age. The test set contains 104 rows and the same number of features as the training set. The age column in the test set is predicted after training on the training set. Another dataset test_rows_labels contains the true age values of the test set which is used to compute R2 scores between true and predicted age.

Hands-on: Data upload

1. Create a new history for this tutorial

2. Import the files from Zenodo

   https://zenodo.org/record/2545213/files/train_rows.csv
   https://zenodo.org/record/2545213/files/test_rows_labels.csv
   https://zenodo.org/record/2545213/files/test_rows.csv
   

   Tip: Importing via links

   • Copy the link location

   • Click galaxy-upload Upload Data at the top of the tool panel

   • Select galaxy-wf-edit Paste/Fetch Data

   • Paste the link(s) into the text field

   • Press Start

   • Close the window

3. Rename the datasets as train_rows, test_rows_labels and test_rows respectively.

   Tip: Renaming a dataset

   • Click on the galaxy-pencil pencil icon for the dataset to edit its attributes
   • In the central panel, change the Name field
   • Click the Save button

4. Check that the datatype of all the three datasets is tabular.

   Tip: Changing the datatype

   • Click on the galaxy-pencil pencil icon for the dataset to edit its attributes
   • In the central panel, click galaxy-chart-select-data Datatypes tab on the top
   • In the galaxy-chart-select-data Assign Datatype, select datatypes from “New type” dropdown
     • Tip: you can start typing the datatype into the field to filter the dropdown menu
   • Click the Save button

The train_rows contains a column Age which is the label or target. We will evaluate our model on test_rows and compare the predicted age with the true age in test_rows_labels

Create data processing pipeline

We will create a pipeline with Pipeline builder tool, but this time, we just specify the regressor. Jana Naue et al. 2017 has used Random Forest as the regressor and we can conclude from this study that the ensemble-based regressor works well on this DNA methylation dataset. Therefore, we will use Gradient boosting which is an ensemble-based regressor because it uses multiple decision tree regressors internally and predicts by taking the collective performances of the predictions (by multiple decision trees). It has a good predictive power and is robust to outliers. It creates an ensemble of weak learners (decision trees) and iteratively minimises error. One disadvantage, which comes from its basic principle of boosting, is that it cannot be parallelised. The Pipeline builder tool will wrap this regressor and return a zipped file and a tabular file containing all tunable hyperparameters.

Hands-on: Create pipeline

1. Pipeline builder tool with the following parameters:
   • In “Final Estimator”:
     • “Choose the module that contains target estimator”: sklearn.ensemble
       • “Choose estimator class”: GradientBoostingRegressor
       • “Type in parameter settings if different from default”: random_state=42
   • In “Output parameters for searchCV?”: Yes

Comment

The ensemble method uses multiple learning models internally for better predictions.

Optimise hyperparameters

For this analysis, we will also use the Hyperparameter search tool to estimate the best values of parameters for the given dataset. We use only one parameter n_estimators of the Gradient boosting regressor for this task. This parameter specifies the number of boosting stages the learning process has to go through. The default value of n_estimators for this regressor is 100. However, we are not sure if this gives the best accuracy. Therefore, it is important to set this parameter to different values to find the optimal one. We choose some values which are less than 100 and a few more than 100. The hyperparameter search will look for the optimal number of estimators and gives the best-trained model as one of the outputs. This model is used in the next step to predict age in the test dataset.

Search for the best values of hyperparameters

We will use the Hyperparameter search tool to find the best values for each hyperparameter. These values will lead us to create the best model based on the search space chosen for each hyperparameter.

Hands-on: Hyperparameter search

1. Hyperparameter search tool with the following parameters:
   • “Select a model selection search scheme”: GridSearchCV - Exhaustive search over specified parameter values for an estimator
     • param-files “Choose the dataset containing pipeline/estimator object”: zipped file (one of the outputs of Pipeline builder tool)
     • In “Search parameters Builder”:
       • param-files “Choose the dataset containing parameter names”: tabular file (the other output of Pipeline builder tool)
       • In “Parameter settings for search”:
         • param-repeat “1: Parameter settings for search”
           • “Choose a parameter name (with current value)”: n_estimators: 100
           • “Search list”: [25, 50, 75, 100, 200]
     • In “Advanced Options for SearchCV”:

       • “Select the primary metric (scoring)”: Regression -- 'r2'

         A scoring metric can be set. In this tutorial, we use Regression -- 'r2'

       • “Select the cv splitter”: KFold

         There are different ways to split the dataset into training and validation sets. In our tutorial, we will use KFold which splits the dataset into K consecutive parts. It is used for cross-validation. It is set to 5 using another parameter n_splits.

         • “n_splits”: 5
         • “Whether to shuffle data before splitting”: Yes

         • “Random seed number”: 3111696

           It is set to an integer and used to retain the randomness/accuracy when “Whether to shuffle data before splitting” is Yes across successive experiments.

       • “Raise fit error”: No

         While setting different values for a parameter during hyperparameter search, it can happen that wrong values are set which may generate exceptions. To avoid stopping the execution of a regressor, it is set to No which means even if a wrong parameter value is encountered, the regressor does not stop running and skips that value.

   • “Select input type”: tabular data
     • param-files “Training samples dataset”: train_rows tabular file
     • “Does the dataset contain header”: Yes
     • “Choose how to select data by column”: All columns EXCLUDING some by column header name(s)
       • “Type header name(s)”: Age
     • param-files “Dataset containing class labels or target values”: train_rows tabular file
     • “Does the dataset contain header”: Yes
     • “Choose how to select data by column”: Select columns by column header name(s)
       • “Type header name(s)”: Age
   • “Whether to hold a portion of samples for test exclusively?”: Nope

Question

What is the optimal number of estimators for the given dataset?

Hint: Please look at the mean_test_score column in the tabular result from the Hyperparameter search tool.

Solution

1. (Even though the default value of the number of estimators for Gradient boosting regressor is 100, 75 gives the best accuracy. That’s why it is important to perform hyperparameter search to tune these parameters for any dataset). 50 estimators also give almost the same accuracy.

Predict age

Using the Hyperparameter search tool, we found the best model based on the training data. Now, we will predict age in the test dataset using this model in order to see if the model has learned important features which can be generalised on a new dataset. The test dataset (test_rows) contains the same number of features, but does not contain the age column. This is predicted using the trained model.

Hands-on: Predict age

1. Ensemble methods for classification and regression tool with the following parameters:
   • “Select a Classification Task”: Load a model and predict
     • param-files “Models”: zipped file (output of Hyperparameter search tool)
     • param-files “Data (tabular)”: test_rows tabular file
     • “Does the dataset contain header”: Yes

Create plots

In the previous step, we generated predictions for the test dataset. We have one more dataset (test_rows_labels) which contains the true age values of the test set. Using the true and predicted values of age in the test set, we will verify the performance by analysing the plots.

Hands-on: Create regression plots

1. Plot actual vs predicted curves and residual plots of tabular data tool with the following parameters:
   • param-files “Select input data file”: test_rows_labels tabular file
   • param-files “Select predicted data file”: tabular file (output of Ensemble methods for classification and regression tool)

The tool outputs three HTML files which contain the interactive plots.

Question

Inspect the plots. What can you say about the predictions?

Solution

Figures 6 and 8 show that the prediction is good because the predicted age lies close to the true age.

Open image in new tab

We can see in the scatter plot (figure 6) that most of the points lie along the x=y curve. It means that the true and predicted ages are close to each other. The root mean square error (RMSE) is 3.76 and the R2 score is 0.94.

Open image in new tab

The residual plot shown in figure 7 is generated to see if there is any visible pattern between residual (predicted age - true age) and predicted age. For a good model, there should not be any visible pattern with the plotted points.

Open image in new tab

Compare results with original paper

Open image in new tab

Summary

Figure 6 shows that we achieved an R2 score of 0.94 and root mean square score of 3.76 for the test set using the Gradient boosting regressor. The study of Jana Naue et al. 2017 also mentions a similar root mean square score (3.93), derived using the random forest regressor. The root mean square score shows the difference in the true and predicted age of humans. The R2 score (0.94) is close to the best achievable score of 1.0 which shows that the trained model is good. Overall, the second part of the analysis also shows that using the machine learning tools in Galaxy, we can achieve state-of-the-art predictions mentioned in the recent scientific studies.

Conclusion

In our tutorial, we were able to use machine learning tools in Galaxy to reproduce the results reported in these scientific studies - Jason G. Fleischer et al. 2018 and Jana Naue et al. 2017. We also learned how to work with high-dimensional datasets, perform a hyperparameter search and cross-validation. Further, we can reuse the trained models to make predictions on a new dataset provided that this new dataset has the same features. There are numerous other machine learning algorithms available in Galaxy which can also be tried out on these datasets to verify whether the accuracy can be improved.

You've Finished the Tutorial

Please also consider filling out the Feedback Form as well!

Key points

• Various machine learning algorithms should be used to find the best ones

• For each machine learning algorithm, it hyperparameters should be optimised based on the dataset

• Feature selection should be done for high-dimensional datasets

Frequently Asked Questions

Feedback

Did you use this material as an instructor? Feel free to give us feedback on how it went.
Did you use this material as a learner or student? Click the form below to leave feedback.

Citing this Tutorial

1. Ekaterina Polkh, Anup Kumar, Age prediction using machine learning (Galaxy Training Materials). https://training.galaxyproject.org/training-material/topics/statistics/tutorials/age-prediction-with-ml/tutorial.html Online; accessed TODAY
2. Hiltemann, Saskia, Rasche, Helena et al., 2023 Galaxy Training: A Powerful Framework for Teaching! PLOS Computational Biology 10.1371/journal.pcbi.1010752
3. Batut et al., 2018 Community-Driven Data Analysis Training for Biology Cell Systems 10.1016/j.cels.2018.05.012

BibTeX

@misc{statistics-age-prediction-with-ml,
author = "Ekaterina Polkh and Anup Kumar",
	title = "Age prediction using machine learning (Galaxy Training Materials)",
	year = "",
	month = "",
	day = "",
	url = "\url{https://training.galaxyproject.org/training-material/topics/statistics/tutorials/age-prediction-with-ml/tutorial.html}",
	note = "[Online; accessed TODAY]"
}
@article{Hiltemann_2023,
	doi = {10.1371/journal.pcbi.1010752},
	url = {https://doi.org/10.1371%2Fjournal.pcbi.1010752},
	year = 2023,
	month = {jan},
	publisher = {Public Library of Science ({PLoS})},
	volume = {19},
	number = {1},
	pages = {e1010752},
	author = {Saskia Hiltemann and Helena Rasche and Simon Gladman and Hans-Rudolf Hotz and Delphine Larivi{\`{e}}re and Daniel Blankenberg and Pratik D. Jagtap and Thomas Wollmann and Anthony Bretaudeau and Nadia Gou{\'{e}} and Timothy J. Griffin and Coline Royaux and Yvan Le Bras and Subina Mehta and Anna Syme and Frederik Coppens and Bert Droesbeke and Nicola Soranzo and Wendi Bacon and Fotis Psomopoulos and Crist{\'{o}}bal Gallardo-Alba and John Davis and Melanie Christine Föll and Matthias Fahrner and Maria A. Doyle and Beatriz Serrano-Solano and Anne Claire Fouilloux and Peter van Heusden and Wolfgang Maier and Dave Clements and Florian Heyl and Björn Grüning and B{\'{e}}r{\'{e}}nice Batut and},
	editor = {Francis Ouellette},
	title = {Galaxy Training: A powerful framework for teaching!},
	journal = {PLoS Comput Biol}
}

                   

Galaxy Administrators: Install the missing tools

You can use Ephemeris's shed-tools install command to install the tools used in this tutorial.

shed-tools install [-g GALAXY] [-a API_KEY] -t <(curl https://training.galaxyproject.org/training-material/api/topics/statistics/tutorials/age-prediction-with-ml/tutorial.json | jq .admin_install_yaml -r)

Alternatively you can copy and paste the following YAML

---
install_tool_dependencies: true
install_repository_dependencies: true
install_resolver_dependencies: true
tools:
- name: plotly_parallel_coordinates_plot
  owner: bgruening
  revisions: 7b21a9b5922f
  tool_panel_section_label: Graph/Display Data
  tool_shed_url: https://toolshed.g2.bx.psu.edu/
- name: plotly_regression_performance_plots
  owner: bgruening
  revisions: 389227fa1864
  tool_panel_section_label: Graph/Display Data
  tool_shed_url: https://toolshed.g2.bx.psu.edu/
- name: sklearn_build_pipeline
  owner: bgruening
  revisions: 840f29aad145
  tool_panel_section_label: Machine Learning
  tool_shed_url: https://toolshed.g2.bx.psu.edu/
- name: sklearn_ensemble
  owner: bgruening
  revisions: 1a53edc4b438
  tool_panel_section_label: Machine Learning
  tool_shed_url: https://toolshed.g2.bx.psu.edu/
- name: sklearn_searchcv
  owner: bgruening
  revisions: 25ab6b4e376e
  tool_panel_section_label: Machine Learning
  tool_shed_url: https://toolshed.g2.bx.psu.edu/

Feedback

5 stars	3
4 stars	3

December 2024

• 5 stars: Liked: The details Disliked: Nothing as in such

July 2024

• 4 stars: Liked: how input are given

October 2020

• 5 stars: Liked: It was very clear Disliked: Yes: some of the parameters are not mentioned (whether we should change them or leave by default). All not mentioned parameters I left by default, but I am not sure it is right.

July 2020

• 4 stars: Liked: Very good examples Disliked: I don't know anything about ML and I started with this tutorial (because it's the first lesson) and I think it is more complicated than the following ones, maybe it could be a future Lesson. I also have problems understanding about pipelines, but it could be me