This tutorial will guide you on getting Sentinel 2 data and processing them in order to calculate and visualize biodiversity indicators. This workflow made of 6 tools will allow you to explore Sentinel 2 data in the view of making biodiversity analyses.

Spatial diversity measurements should not replace in situ biodiversity data, but rather complement existing data and approaches. Spatial diversity estimates are currently based on long time scales, allowing more general predictions about rates of change in diversity. In practice, spatial data incorporate information on surface properties, including functional aspects, taxonomy, phylogeny and genetic diversity. 

The tools explained here are useful for observing variations in spatial and temporal ecosystem properties given the intrinsic relationship between spatial variations in ecosystems and pixel values of spectral signals. A single measurement cannot provide a complete description of all the different aspects of ecosystem heterogeneity. Therefore, the combination of multiple tools in a Galaxy-Ecology workflow offers multiple approaches to unravel the complexity of ecosystem heterogeneity in space and time.

So, we will compute biodiversity and spectral indices mainly using reflectance information.

Details: Definition of reflectance

The reflectance is a proportion on reflected light on an area. It’s the ratio between the electromagnetic incident wave on the area and the reflected wave. It’s often a percentage between reflected intensity and incident intensity assumed as energy quantity.

Open image in new tab

Each part of this workflow has elementary steps :

• A first step to preprocess Sentinel 2 data:
  • Preprocess Sentinel 2 data
• A second step to compute biodiversity indicators
  • Global overview
  • For Canopy
• A third step to compute spectral indices:
  • Spectral indices
  • EBV

Details: Details about spectral indices

Spectral indices are used to highlight particular features or properties of the earth’s surface, e.g. vegetation, soil, water. They are developed on the basis of the spectral properties of the object of interest.

Knowledge of the leaf cell, plant structure, state, condition and spectral properties is essential to perform vegetation analysis using remote sensing data.   Spectral indices dedicated to vegetation analysis are developed on the basis that healthy vegetation reflects strongly in the near infrared (NIR) spectrum while absorbing strongly in the visible red.  

In this tutorial, we’ll be working on Sentinel 2 data extracted from the Theia Land portal. First those data will be prepared. After pre-processing to fit the input format of the tools, we’ll see how to calculate biodiversity metrics.

Agenda

In this tutorial, we will cover:

1. Upload and pre-processing of the data
2. Preparing data
   1. Preprocessing sentinel 2 data
3. Producing biodiversity indicators
   1. Compute a PCA
   2. Compute biodiversity indices
   3. Compute a PCA
   4. Create Biodiversity maps
   5. Processing remote sensing data
4. Spectral indices
5. Conclusion

Warning: It can take a bit of time

As your processing heavy data some of the steps can take some time. Notably, the step Create Biodiversity maps can run for 2 days. We advise to let it run and proceed with the tutorial. Once, the pre-processing part is done all the steps can be done separately. Thus, no need for you to wait the end of each tool before running another one.

Upload and pre-processing of the data

This first step consist of downloading and properly prepare the data to use it in Sentinel 2 toolsuite.

Hands-on: Data upload

1. Create a new history for this tutorial and give it a name (example: “Sentinel 2 data for biodiversity tutorial”) for you to find it again later if needed.

   Tip: Creating a new history

   To create a new history simply click the new-history icon at the top of the history panel:

   

2. Download the files from Scihub, PEPS or Theia :

   You will have to to create an account for either of these platform. Select Reflectance, Sentinel 2 and “Niveau 2A” (level 2A).

   Open image in new tab
   
   

   This an example of the Theia land portal. You need to download a zip folder. Keep it that way.

3. Upload the zip folder

   Tip: Upload few files (1-10)

   1. Click on Upload Data on the top of the left panel
   2. Click on Choose local file and select the files or drop the files in the Drop files here part
   3. Click on Start
   4. Click on Close

4. You can rename galaxy-pencil the dataset, sentinel_2_data.zip for example, and to keep informations about the original name SENTINEL2A.....zip

   Tip: Renaming a dataset

   • Click on the galaxy-pencil pencil icon for the dataset to edit its attributes
   • In the central panel, change the Name field
   • Click the Save button

Preparing data

Using preprocS2 R package, this step provides a unique tool to read, crop, resample the original image directory, and write it as a raster stack

Preprocessing sentinel 2 data

Hands-on: Preprocess

1. Preprocessing sentinel 2 data ( Galaxy version 0.0.1) with the following parameters:
   • param-file “Input data”: sentinel_2_data.zip (Input dataset)
   • param-select “Where does your data come from ?”: ‘From Theia’

2. Click on Execute

   Comment

   The interesting output is the ENVI image format which is a binary raster file with an accompanying header file. The data are stored as a binary stream of bytes in a BIL file without extension and the metadata are stored in the .hdr file. These data are in the output Reflectance. You can directly use the output Reflectance for the rest of the analysis.

Open image in new tab

Question

1. What are the files you are interested in for the following tools ?

Solution

1. The 2 files in the Reflectance folder that finish by “_Refl” and “_Refl.hdr”

Producing biodiversity indicators

You can choose to compute spectral and biodiversity indicators either for global remote sensing data or for a canopy.

Hands-on: Choose Your Own Tutorial

This is a "Choose Your Own Tutorial" section, where you can select between multiple paths. Click one of the buttons below to select how you want to follow the tutorial

Here you can choose which tutorial you want to folllow according to if your are more interested about studying canopy remote sensing data or more global ones

Global Canopy

Compute a PCA

Hands-on: Principal components analysis for remote sensing data

1. Compute a PCA ( Galaxy version 0.0.1) with the following parameters:
   • param-select “In which format are your data ?”: ‘The data you are using are in a zip folder Reflectance’
     • param-file “Input data”: Reflectance (output of Preprocessing sentinel 2 data tool)
   • param-select “Do you want to do a PCA or a SPCA ?”: ‘PCA’

   Tip: If you want to use your own files ENVI BIL

   Check that the “Input raster” datatype is bil and that “Input raster header” datatype is hdr

   • Go on your raster data
   • Click on galaxy-pencil to edit it
   • Click on galaxy-chart-select-data Datatypes
   • On “New Type” Select bil

   • Press Save

     Comment

     Do the same for the raster header with the datatype hdr

Compute biodiversity indices

Hands-on: Biodiversity indicators for global remote sensing data

1. Compute biodiversity indices ( Galaxy version 0.0.1) with the following parameters:
   • param-select “In which format are your data ?”: ‘The data you are using are in a zip folder Reflectance’
     • param-file “Input data”: Reflectance (output of Preprocessing sentinel 2 data tool)
   • param-text “Write a number of the value of alpha”: ‘1’

   Tip: If you want to use your own files ENVI BIL

   Check that the “Input raster” datatype is bil and that “Input raster header” datatype is hdr

   • Go on your raster data
   • Click on galaxy-pencil to edit it
   • Click on galaxy-chart-select-data Datatypes
   • On “New Type” Select bil

   • Press Save

     Comment

     Do the same for the raster header with the datatype hdr

   Tip: You can use the output of **Compute a PCA**

   • param-select “In which format are your data ?”: ‘Your already have the files in ENVI BIL format’
   • param-file “Input raster”: PCA raster (output of Compute a PCA tool)
   • param-file “Input header”: PCA header (output of Compute a PCA tool)
   • param-text “Write a number of the value of alpha”: ‘1’

   Here again check that the “Input raster” datatype is bil and that “Input raster header” datatype is hdr

Open image in new tab

Open image in new tab

These 2 pictures are only exemple it is normal if you don’t have exactly the same output.

Question

1. How many biodiversity indicators do you have ?

Solution

1. You should have 7 of them (Shannon, Renyi, Prao, Pielou, Hill, CRE, Berger-Parker). If you have only 5 of them, no problem, it just means you data are too small to compute CRE and Pielou but you can still continue your analysis.

Compute a PCA

Hands-on: Principal components analysis for remote sensing data

1. Compute a PCA ( Galaxy version 0.0.1) with the following parameters:
   • param-select “In which format are your data ?”: ‘The data you are using are in a zip folder Reflectance’
     • param-file “Input data”: Reflectance (output of Preprocessing sentinel 2 data tool)
   • param-select “Do you want to do a PCA or a SPCA ?”: ‘PCA’

   Tip: If you want to use your own files ENVI BIL

   Check that the “Input raster” datatype is bil and that “Input raster header” datatype is hdr

   • Go on your raster data
   • Click on galaxy-pencil to edit it
   • Click on galaxy-chart-select-data Datatypes
   • On “New Type” Select bil

   • Press Save

     Comment

     Do the same for the raster header with the datatype hdr

Create Biodiversity maps

Hands-on: Biodiversity indicators for canopy remote sensing data

1. Mapping diversity ( Galaxy version 0.0.1) with the following parameters:
   • param-select “In which format are your data ?”: ‘The data you are using are in a zip folder Reflectance’
     • param-file “Input data”: Reflectance (output of Preprocessing sentinel 2 data tool)
   • param-select “Alpha, beta, functional diversity and comparison plot and map”: ‘All of the above’

   Tip: If you want to use your own files ENVI BIL

   Check that the “Input raster” datatype is bil and that “Input raster header” datatype is hdr

   • Go on your raster data
   • Click on galaxy-pencil to edit it
   • Click on galaxy-chart-select-data Datatypes
   • On “New Type” Select bil

   • Press Save

     Comment

     Do the same for the raster header with the datatype hdr

Open image in new tab

Open image in new tab

Processing remote sensing data

Hands-on: Comparing biodiversity indicators for canopy

1. Comparing remote sensing data ( Galaxy version 0.0.1) with the following parameters:
   • param-select “In which format are your data ?”: ‘The data you are using are in a zip folder Reflectance’
     • param-file “Input data”: Reflectance (output of Preprocessing sentinel 2 data tool)
   • param-file “Plots folder zip”: output (Input dataset)

   Comment: Shapefiles

   Here you must provide your folder of shapefiles (at least 2 in order to have the beta diversity).

   Comment: Check datatype if you use your own ENVI BIL files

   Same as the compute spectral indices make sure you have the right datatypes bil and hdr.

Open image in new tab

Open image in new tab

Question

1. What kind of data do you need to use these tools ?
2. Do you need a shapefile for mapping the diversity ?
3. Why do you need multiple locations for comparing biodiversity ?

Solution

1. This analisys is for data on forest, it’s a canopy study.
2. No, only for the comparison with in situ data.
3. The Bray curtis table compare the diversity between locations.

Spectral indices

Hands-on: Compute spectral indices

1. Compute spectral indices ( Galaxy version 0.0.1) with the following parameters:
   • param-select “In which format are your data ?”: ‘The data you are using are in a zip folder Reflectance’
     • param-file “Input data”: Reflectance (output of Preprocessing sentinel 2 data tool)

   • param-select “Input the type of indice you want”: ‘NDVI’

   • param-select “Do you want the raster layer of the indice as an output ?”: ‘No’

   Tip: If you want to use your own files ENVI BIL

   Check that the “Input raster” datatype is bil and that “Input raster header” datatype is hdr

   • Go on your raster data
   • Click on galaxy-pencil to edit it
   • Click on galaxy-chart-select-data Datatypes
   • On “New Type” Select bil

   • Press Save

     Comment

     Do the same for the raster header with the datatype hdr

   Comment

   You can choose whichever indice you want

Open image in new tab

Details: Spectral indices and Essential Biodiversity Variables

Remotely sensed diversity is consistent with most of the essential spatially constrained biodiversity variables proposed by Skidmore et al. (2015). This highlights the need for increased dialogue and collaboration between the biodiversity monitoring community and the remote sensing community to make satellite remote sensing a tool of choice for conservation. Increased dialogue is also essential within the biodiversity monitoring community to achieve this. From this point of view multiple Satellite Remote Sensing EBV (SRS EBV) were created. Some of the indices proposed here will allow you to compute SRS EBV. For instance it allows you to compute one of GEO BON EBV Canopy Chlorophyll Content. This EBV is computed by GEO BON on the Netherlands, here you can compute it on which ever Sentinel 2 data you want by chosing to calculate the indice CCCI.

Open image in new tab

Question

1. What’s the difference between biodiversity indicators and spectral indices ?

Solution

1. Biodiversity indicators give us informations on the heterogeneity of the landscape whereas spectral indices inform us on the well being of the vegetation.

Conclusion

You are now all set to use your remote sensing data in order to do a biodiversity analysis. Before you go on one last reflexion.

Question

1. Should remote sensing replace in-situ data ?

Solution

1. NO ! remote sensing and in-situ data should come and complete one another to have the most complete view of the state of biodiversity.

You've Finished the Tutorial

Please also consider filling out the Feedback Form as well!

Key points

• Remote sensing data can be useful to find hotspots of biodiversity.

• Spectral indices are of key importance to asset vegetation well-being.

• Always keep in mind that remote sensing and in-situ data are complementary.

Frequently Asked Questions

Useful literature

Further information, including links to documentation and original publications, regarding the tools, analysis techniques and the interpretation of results described in this tutorial can be found here.

Feedback

Did you use this material as an instructor? Feel free to give us feedback on how it went.
Did you use this material as a learner or student? Click the form below to leave feedback.

Citing this Tutorial

1. Marie Josse, Yvan Le Bras, Sentinel 2 biodiversity (Galaxy Training Materials). https://training.galaxyproject.org/training-material/topics/ecology/tutorials/remote-sensing/tutorial.html Online; accessed TODAY
2. Hiltemann, Saskia, Rasche, Helena et al., 2023 Galaxy Training: A Powerful Framework for Teaching! PLOS Computational Biology 10.1371/journal.pcbi.1010752
3. Batut et al., 2018 Community-Driven Data Analysis Training for Biology Cell Systems 10.1016/j.cels.2018.05.012

BibTeX

@misc{ecology-remote-sensing,
author = "Marie Josse and Yvan Le Bras",
	title = "Sentinel 2 biodiversity (Galaxy Training Materials)",
	year = "",
	month = "",
	day = ""
	url = "\url{https://training.galaxyproject.org/training-material/topics/ecology/tutorials/remote-sensing/tutorial.html}",
	note = "[Online; accessed TODAY]"
}
@article{Hiltemann_2023,
	doi = {10.1371/journal.pcbi.1010752},
	url = {https://doi.org/10.1371%2Fjournal.pcbi.1010752},
	year = 2023,
	month = {jan},
	publisher = {Public Library of Science ({PLoS})},
	volume = {19},
	number = {1},
	pages = {e1010752},
	author = {Saskia Hiltemann and Helena Rasche and Simon Gladman and Hans-Rudolf Hotz and Delphine Larivi{\`{e}}re and Daniel Blankenberg and Pratik D. Jagtap and Thomas Wollmann and Anthony Bretaudeau and Nadia Gou{\'{e}} and Timothy J. Griffin and Coline Royaux and Yvan Le Bras and Subina Mehta and Anna Syme and Frederik Coppens and Bert Droesbeke and Nicola Soranzo and Wendi Bacon and Fotis Psomopoulos and Crist{\'{o}}bal Gallardo-Alba and John Davis and Melanie Christine Föll and Matthias Fahrner and Maria A. Doyle and Beatriz Serrano-Solano and Anne Claire Fouilloux and Peter van Heusden and Wolfgang Maier and Dave Clements and Florian Heyl and Björn Grüning and B{\'{e}}r{\'{e}}nice Batut and},
	editor = {Francis Ouellette},
	title = {Galaxy Training: A powerful framework for teaching!},
	journal = {PLoS Comput Biol} Computational Biology}
}

                   

Funding

These individuals or organisations provided funding support for the development of this resource

PNDB

Galaxy Administrators: Install the missing tools

You can use Ephemeris's shed-tools install command to install the tools used in this tutorial.

shed-tools install [-g GALAXY] [-a API_KEY] -t <(curl https://training.galaxyproject.org/training-material/api/topics/ecology/tutorials/remote-sensing/tutorial.json | jq .admin_install_yaml -r)

Alternatively you can copy and paste the following YAML

---
install_tool_dependencies: true
install_repository_dependencies: true
install_resolver_dependencies: true
tools:
- name: srs_diversity_maps
  owner: ecology
  revisions: 9adccd3da70c
  tool_panel_section_label: Compute indicators for satellite remote sensing
  tool_shed_url: https://toolshed.g2.bx.psu.edu/
- name: srs_global_indices
  owner: ecology
  revisions: 5cae678042ec
  tool_panel_section_label: Compute indicators for satellite remote sensing
  tool_shed_url: https://toolshed.g2.bx.psu.edu/
- name: srs_pca
  owner: ecology
  revisions: 21e21363a8b4
  tool_panel_section_label: Compute indicators for satellite remote sensing
  tool_shed_url: https://toolshed.g2.bx.psu.edu/
- name: srs_preprocess_s2
  owner: ecology
  revisions: 33a1e15f7252
  tool_panel_section_label: Compute indicators for satellite remote sensing
  tool_shed_url: https://toolshed.g2.bx.psu.edu/
- name: srs_process_data
  owner: ecology
  revisions: cf69ad260611
  tool_panel_section_label: Compute indicators for satellite remote sensing
  tool_shed_url: https://toolshed.g2.bx.psu.edu/
- name: srs_spectral_indices
  owner: ecology
  revisions: b40aba3d9e5c
  tool_panel_section_label: Compute indicators for satellite remote sensing
  tool_shed_url: https://toolshed.g2.bx.psu.edu/

Feedback

No feedback has been recieved yet for this training. Be the first one by filling in the feedback form from above.